2013年7月3日星期三

Pass4Test offre de Network Appliance NS0-502 matériaux d'essai

Pass4Test est un site de vous ramener au succès. Pass4Test peut vous aider à promouvoir les connaissances essentielles pour le test Network Appliance NS0-502 et passer le test à la première fois.


L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification Network Appliance NS0-502. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification Network Appliance NS0-502.


Pass4Test est un site de provider les chances à se former avant le test Certification IT. Il y a de différentes formations ciblées aux tous candidats. C'est plus facile à passer le test avec la formation de Pass4Test. Parmi les qui ont déjà réussi le test, la majorité a fait la préparation avec la Q&A de Pass4Test. Donc c'est pourquoi, Pass4Test a une bonne réputation dansn l'Industrie IT.


Code d'Examen: NS0-502

Nom d'Examen: Network Appliance (NetApp Certified Implementation Engineer-SAN and Virtualization)

Questions et réponses: 106 Q&As

Le test de Certification Network Appliance NS0-502 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.


Choisissez le Pass4Test, choisissez le succès. Le produit offert par Pass4Test vous permet à réussir le test Network Appliance NS0-502. C'est necessaire de prendre un test simulation avant participer le test réel. C'est une façon bien effective. Choisir Pass4Test vous permet à réussir 100% le test.


Pass4Test vous offre un choix meilleur pour faire votre préparation de test Network Appliance NS0-502 plus éfficace. Si vous voulez réussir le test plus tôt, il ne faut que ajouter la Q&A de Network Appliance NS0-502 à votre cahier. Pass4Test serait votre guide pendant la préparation et vous permet à réussir le test Network Appliance NS0-502 sans aucun doute. Vous pouvez obtenir le Certificat comme vous voulez.


NS0-502 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-502.html


NO.1 A customer has a four-node SUN cluster configuration. Each node has two, dual-ported HBAs.
What is the minimum number of igroups that need to be created to map a LUN to the cluster?
A. 1
B. 2
C. 4
D. 8
Answer: A

Network Appliance examen   NS0-502   NS0-502   certification NS0-502   certification NS0-502   certification NS0-502

NO.2 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. full mesh
B. core-edge
C. full cascade
D. partial mesh
Answer: B

Network Appliance examen   certification NS0-502   certification NS0-502   NS0-502   NS0-502   NS0-502

NO.3 Click the Exhibit button.
In the diagram shown, a portset is created on controller 1 with the command: controller1>portset create -f
ntapportset 0b. This portset is bound to the igroup with all the initiators in it.
How many paths can host 1 see to a LUN on controller 1?
A. six paths
B. four paths
C. eight paths
D. two paths
Answer: D

Network Appliance examen   NS0-502   certification NS0-502   NS0-502

NO.4 A 100-GB thinly provisioned LUN is allocated to a Windows host. 100 GB of data is written into the
LUN. The current capacity utilization on the disk array as well as the host is 100%. 50 GB of data is
deleted from the LUN. Space reclaimer has NOT been run.
What is the current capacity utilization on both the host and the disk array?
A. 50% on the host, 100% on the disk array
B. 100% on the host, 50% on the disk array
C. 50% on the host, 50% on the disk array
D. 100% on the host, 100% on the disk array
Answer: A

Network Appliance   certification NS0-502   NS0-502   NS0-502

NO.5 An organization currently has a NetApp Fibre Channel block-based solution. With limited budget and
resources, they want to create a new disaster recovery site that utilizes a NetApp solution.
What would the optimal solution include?
A. SnapMover and Fibre Channel at the disaster recovery site for all hosts
B. SnapMirror and iSCSI at the disaster recovery site for all hosts
C. Fibre Channel at both locations using ftp to replicate storage
D. MetroCluster and NAS
Answer: B

certification Network Appliance   NS0-502   NS0-502   NS0-502   NS0-502

NO.6 Click the Exhibit button.
You see the following error on the storage controller's console or messages file.
What is the most likely cause for this error?
A. portal group misconfiguration
B. iSCSI CHAP misconfiguration
C. iSNS misconfiguration
D. IPsec misconfiguration
Answer: B

Network Appliance   certification NS0-502   NS0-502 examen

NO.7 A 200-GB LUN is created in an empty 500-GB volume with the volume guarantee option set to Volume.
LUN reservation is enabled and the fractional reserve is set to 100 and scheduled snapshots are
disabled.
Directly after LUN creation, what is the maximum free space available in the volume?
A. 200 GB
B. 300 GB
C. 400 GB
D. 500 GB
Answer: B

certification Network Appliance   NS0-502   NS0-502   certification NS0-502

NO.8 Click the Exhibit button.
Based on the diagram shown, what is the appropriate FC switch topology?
A. core-edge
B. full mesh
C. partial mesh
D. partial cascade
Answer: C

Network Appliance   certification NS0-502   NS0-502 examen   NS0-502

NO.9 A company has a Fibre Channel environment and wants to connect a new host in a remote data
center using 50/125um OM2 multi-mode fiber cable and needs to support 2 Gb speeds.
What is the maximum distance of the cable run supported in this situation?
A. 50/125um OM2 multi-mode fiber cable supports up to 500 meters at 2 Gb.
B. 50/125um OM2 multi-mode fiber cable supports up to 10000 meters at 2 Gb.
C. 50/125um OM2 multi-mode fiber cable supports up to 150 meters at 2 Gb.
D. 50/125um OM2 multi-mode fiber cable supports up to 300 meters at 2 Gb.
Answer: D

certification Network Appliance   NS0-502   NS0-502   NS0-502

NO.10 Zoning by World Wide Port Name (WWPN) is deployed and a host HBA is replaced.
Which zone change needs to be made?
A. No changes are necessary.
B. The zone configuration should be changed to include the port to which the HBA is connected.
C. The zone configuration should be changed to include the WWPN of the new HBA; the old WWPN will
be automatically dropped.
D. The zone configuration should be changed to include the WWPN of the new HBA and to remove the
WWPN of the old HBA.
Answer: D

certification Network Appliance   NS0-502   NS0-502   certification NS0-502

NO.11 Which three protocols can be used for communications between a host running SnapDrive for
Windows and the NetApp Storage Controllers? (Choose three.)
A. http:
B. https:
C. ftp:
D. RPC
E. ssh
Answer: ABD

certification Network Appliance   NS0-502   certification NS0-502   certification NS0-502   NS0-502

NO.12 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for an
Emulex LP1xxxx/LPe1xxxx HBA?
A. EMutil
B. SANutil
C. hbainfo
D. SANsurfer
E. HBAnywhere
Answer: E

Network Appliance examen   NS0-502 examen   NS0-502 examen   NS0-502   NS0-502 examen

NO.13 Which utility on Solaris 10 can be used to collect information about firmware and driver versions for a
Qlogic QLAxxx/QLExxxx HBA?
A. EMutil
B. SANutil
C. cfgadmin
D. SANsurfer
E. HBAnywhere
Answer: D

Network Appliance examen   certification NS0-502   NS0-502   NS0-502   NS0-502   NS0-502 examen

NO.14 Click the Exhibit button.
Given the information provided in the diagram, what is the appropriate FC topology?
A. point-to-point
B. switched fabric
C. arbitrated loop
D. ring
Answer: B

Network Appliance   NS0-502   NS0-502   NS0-502

NO.15 Any newly installed system with Data ONTAP 7.3.1 supports which cfmode?
A. dual_fabric only
B. single_image
C. partner
D. mixed
Answer: B

Network Appliance   NS0-502 examen   certification NS0-502

NO.16 Which utility on Windows 2003 and Windows 2008 can be used to collect information about firmware
and driver versions for an Emulex LP1xxxx/LPe1xxx HBA?
A. EMutil
B. SANutil
C. fcp config
D. SANsurfer
E. HBAnywhere
Answer: E

certification Network Appliance   NS0-502   NS0-502   NS0-502   NS0-502

NO.17 Click the Exhibit Button
The table highlights the space management policy that is defined for a particular flexvol, acmevol.
Based on the information provided in the table, which action will the storage controller take when it runs
out of space in the volume?
A. It will try deleting Snapshot copies first to reclaim space before trying to grow the volume.
B. It will grow the volume before deleting Snapshot copies.
C. It will only try deleting Snapshot copies to reclaim space and will not grow the volume.
D. It is irrelevant since fractional_reserve is 0%.
Answer: C

Network Appliance   certification NS0-502   NS0-502   NS0-502 examen

NO.18 What would you use to share a data LUN among multiple servers where each server has simultaneous
write access?
A. host-based BootBIOS
B. host-based multipathing
C. host-based volume manager
D. host-based clustered file system
Answer: D

certification Network Appliance   NS0-502   certification NS0-502   NS0-502 examen   NS0-502 examen   certification NS0-502

NO.19 Which FC SAN topology provides the best performance and scalability?
A. cascade
B. core-edge
C. full mesh
D. partial mesh
Answer: B

Network Appliance   NS0-502   NS0-502   NS0-502

NO.20 What are three relevant perfstat counters to check for unaligned I/O that do not fall on the WAFL
boundary? (Choose three.)
A. wp.partial_write
B. vvol_read.io_valid
C. read/write_align_histo.XX
D. read/write_partial_blocks.XX
E. xinode content misses
Answer: ACD

certification Network Appliance   NS0-502 examen   NS0-502   certification NS0-502

Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.


没有评论:

发表评论