Dans cette société de l'information technologies, c'est bien populaire que l'on prenne la formation en Internet, Pass4Test est l'un des sites d'offrir la formation particulère pour le test Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 JN0-541. Pass4Test a une expérience riche pour répondre les demandes des candidats.
Pass4Test est un site professionnel qui répondre les demandes de beaucoup clients. Les candidats qui ont déjà passer leurs premiers test Certification IT ont devenus les suivis de Pass4Test. Grâce à la bonne qualité des documentations, Pass4Test peut aider tous candidats à réussir le test Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 JN0-541.
Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 JN0-541 est lequel très important dans les tests de Certification Juniper. Pour être qualifié de Juniper, on doit obtenir le passport de test Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 JN0-541.
Selon les feedbacks offerts par les candidats, c'est facile à réussir le test Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 JN0-541 avec l'aide de la Q&A de Pass4Test qui est recherché particulièrement pour le test Certification Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 JN0-541. C'est une bonne preuve que notre produit est bien effective. Le produit de Pass4Test peut vous aider à renforcer les connaissances demandées par le test Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 JN0-541, vous aurez une meilleure préparation avec l'aide de Pass4Test.
Code d'Examen: JN0-311
Nom d'Examen: Juniper (WX, Associate(JNCIA-WX))
Questions et réponses: 123 Q&As
Code d'Examen: JN0-341
Nom d'Examen: Juniper (ER.Associate(JNCIA-ER))
Questions et réponses: 180 Q&As
Code d'Examen: JN0-201
Nom d'Examen: Juniper (Juniper networks Certified internet associate.m(jncia-m))
Questions et réponses: 120 Q&As
Code d'Examen: JN0-120
Nom d'Examen: Juniper (Juniper networks Certified internet associate.e(jncia-e))
Questions et réponses: 120 Q&As
Code d'Examen: JN0-521
Nom d'Examen: Juniper (FWV.Associate (JNCIA-FWV))
Questions et réponses: 119 Q&As
Code d'Examen: JN0-541
Nom d'Examen: Juniper (IDP, Associate(JNCIA-IDP))
Questions et réponses: 230 Q&As
Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 JN0-541. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test Juniper JN0-311 JN0-341 JN0-201 JN0-120 JN0-521 JN0-541. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.
JN0-201 Démo gratuit à télécharger: http://www.pass4test.fr/JN0-201.html
NO.1 Firewall filters can be used to accept, discard, or reject packets based on _____. (Choose three.)
A. protocol type
B. MAC address
C. TCP or UDP port
D. source and destination IP address
Answer: ACD
Juniper examen JN0-201 examen JN0-201
NO.2 During OSPF adjacency formation, in what state is a router when it is negotiating to be in charge of the
database synchronization process?
A. Init
B. 2Way
C. ExStart
D. Exchange
Answer: C
Juniper JN0-201 JN0-201 examen
NO.3 What command would you use to view an IS-IS adjacency?
A. show iso neighbor
B. show isis neighbor
C. show iso adjacency
D. show isis adjacency
Answer: D
Juniper JN0-201 certification JN0-201 JN0-201 examen
NO.4 What type of OSPF router is responsible for redistributing routes into OSPF?
A. ABR
B. ASBR
C. internal router
D. backbone router
Answer: B
Juniper examen JN0-201 examen JN0-201 JN0-201 examen
NO.5 Which CLI command is used to see the current OSPF link-state database?
A. show ospf database
B. show ospf neighbor
C. show protocols ospf
D. show ospf link-state
Answer: A
certification Juniper certification JN0-201 JN0-201 examen
NO.6 Two Level 2 routers are exchanging Hello packets with different Area IDs. What occurs between these
routers?
A. An Adjacency forms.
B. An Adjacency does not form.
C. An Adjacency forms but traffic is not forwarded.
D. No IS-IS PDUs are sent.
Answer: A
certification Juniper JN0-201 examen JN0-201 JN0-201 examen
NO.7 What is the first step in BGP route selection?
A. The local router prefers the route with the shortest AS_PATH.
B. The router first verifies that it has a route to the BGP Next Hop IP address.
C. The local router prefers the route from the peer with the lowest peer ID address.
D. The local router prefers the route learned from an EBGP peer over a route learned from an IBGP peer.
Answer: B
certification Juniper JN0-201 JN0-201 examen JN0-201 examen JN0-201 examen
NO.8 How often are IS-IS Hello packets transmitted?
A. 3 seconds for DIS; 9 seconds for non-DIS
B. 9 seconds for DIS; 3 seconds for non-DIS
C. 10 seconds for DIS; 3 seconds for non-DIS
D. 10 seconds for all routers
Answer: A
Juniper certification JN0-201 JN0-201 examen JN0-201
NO.9 What are two ways that a valid IBGP peering session can be configured? (Choose two.)
A. via the accept x.x/y command
B. via TCP reachable physical interface addresses
C. via remote loopbacks with the local-address command
D. via UDP with the neighbor x.x.x.x command at the group level
Answer: BC
certification Juniper JN0-201 examen JN0-201 JN0-201
NO.10 If all OSPF routers on a broadcast network have the same OSPF priority, what parameter is used to
determine the new BDR at the time of a DR failure?
A. area ID
B. router ID
C. loopback address
D. IP address of interface on broadcast network
Answer: B
Juniper examen certification JN0-201 JN0-201 JN0-201 JN0-201
NO.11 What is the purpose of the OSPF link-state update packet?
A. describes a change to the OSPF hello timer
B. carries one or more link-state advertisements
C. establishes and maintains neighbor relationships
D. describes the contents of the entire link-state database
Answer: B
Juniper JN0-201 JN0-201 JN0-201 JN0-201
NO.12 A firewall filter is applied as an input filter on a transit interface. What three types of traffic will this affect?
(Chose three.)
A. inbound traffic transiting the router
B. outbound traffic transiting the router
C. traffic destined to the Routing Engine
D. traffic destined to the interface address on which the filter is applied
Answer: ACD
Juniper examen JN0-201 JN0-201 examen JN0-201 examen
NO.13 Assume that a comparable configuration is applied to your peer in AS 11 and that bi-directional TCP
reachability has been achieved. Which EBGP configuration will allow the BGP session to become
established?
A. routing-options { autonomous-system 64; } protocols { bgp { group external-peer11 { type external;
neighbor 10.0.3.6 { peer-as 11; } } }
B. routing-options { autonomous-system 11; } protocols { bgp { group external-peer1 { type external;
peer-as 11;{ neighbor 10.0.3.6; } }
C. routing-options { autonomous-system 11; } protocols { bgp { group external-peer11 { type external;
peer-as 64;{ neighbor 10.0.3.6; } group external-peer11 { type external; peer-as 64;{ neighbor
10.0.3.6; } } type external; peer-as 64;{ neighbor 10.0.3.6; } } peer-as 64;{ neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } }
D. routing-options { }
E. routing-options { autonomous-system 64; }
F. routing-options { autonomous-system 64; }
G. routing-options { autonomous-system 64; } protocols {
H. routing-options { autonomous-system 64; } protocols { bgp { autonomous-system 64; } protocols { bgp
{ group external-peer101 { } protocols { bgp { group external-peer101 { peer-as 101; protocols { bgp
{ group external-peer101 { peer-as 101; neighbor 10.0.3.6; protocols { bgp { group external-peer101
{ peer-as 101; neighbor 10.0.3.6; } bgp { group external-peer101 { peer-as 101; neighbor 10.0.3.6; } }
group external-peer101 { peer-as 101; neighbor 10.0.3.6; } } peer-as 101; neighbor 10.0.3.6; } }
neighbor 10.0.3.6; } } } } }
Answer: A
Juniper certification JN0-201 JN0-201
NO.14 By default, which command can be used to display information about packets that have been logged
with the syslog firewall filter action?
A. show log
B. show firewall
C. show log messages
D. show firewall log
Answer: C
certification Juniper JN0-201 certification JN0-201
NO.15 Three IS-IS routers on a broadcast segment have different priority values configured. Which router is
elected the DIS on that broadcast segment?
A. the router with the lowest priority
B. the router with the highest priority
C. the router with the highest System ID
D. the router with the highest IP address
Answer: B
certification Juniper JN0-201 JN0-201 JN0-201 JN0-201 examen certification JN0-201
NO.16 How do you enable interface fe-0/0/0 under the [edit protocols isis] level to form both a Level 1 and
Level 2 adjacency?
A. set interface fe-0/0/0.0
B. set interface fe-0/0/0.0 all level
C. set interface fe-0/0/0.0 level 3 enable
D. set interface fe-0/0/0.0 level 1 level 2
Answer: A
Juniper examen JN0-201 examen JN0-201 examen
NO.17 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D
Juniper examen certification JN0-201 JN0-201 JN0-201
NO.18 What are the three components of the ISO NET address? (Choose three.)
A. Area ID
B. N-selector
C. System ID
D. AS number
E. ISO number
F. MAC address
Answer: ABC
Juniper JN0-201 JN0-201 examen JN0-201
NO.19 Once the TCP connection is established, which message type initiates the BGP peering process?
A. Open
B. Active
C. Update
D. Keepalive
E. Notification
Answer: A
Juniper JN0-201 examen JN0-201 JN0-201 examen certification JN0-201
NO.20 What are two purposes of the AS_PATH attribute? (Choose two.)
A. route selection
B. loop avoidance
C. determining equal cost paths for reachablilty
D. defining the application of other BGP attributes
Answer: AB
Juniper examen JN0-201 certification JN0-201 JN0-201 examen certification JN0-201
没有评论:
发表评论