C'est sûr que le Certificat SNIA S10-300 puisse améliorer le lendemain de votre carrière. Parce que si vous pouvez passer le test SNIA S10-300, c'est une meilleure preuve de vos connaissances professionnelles et de votre bonne capacité à être qualifié d'un bon boulot. Le Certificat SNIA S10-300 peut bien tester la professionnalité de IT.
Pass4Test est un site d'offrir l'outil de formation convenable pour les candidats de test Certification IT. Le produit de Pass4Test peut aider les candidats à économiser les temps et les efforts. L'outil de formation est bien proche que test réel. Vous allez réussir le test 100% avec l'aide de test simulation de Pass4Test. C'est une bonne affaire à prendre le Certificat IT en coûtant un peu d'argent. N'hésitez plus d'ajouter l'outil de formation au panier.
Vous pouvez comparer un peu les Q&As dans les autres sites web que lesquelles de Pass4Test, c'est pas difficile à trouver que la Q&A SNIA S10-300 est plus complète. Vous pouvez télécharger le démo gratuit à prendre un essai de la qualité de Pass4Test. La raison de la grande couverture des questions et la haute qualité des réponses vient de l'expérience riche et la connaissances professionnelles des experts de Pass4Test. La nouvelle Q&A de SNIA S10-300 lancée par l'équipe de Pass4Test sont bien populaire par les candidats.
Le Pass4Test est un site qui peut offrir les facilités aux candidats et aider les candidats à réaliser leurs rêve. Si vous êtes souci de votre test Certification, Pass4Test peut vous rendre heureux. La haute précision et la grande couverture de la Q&A de Pass4Test vous aidera pendant la préparation de test. Vous n'aurez aucune raison de regretter parce que Pass4Test réalisera votre rêve.
Code d'Examen: S10-300
Nom d'Examen: SNIA (Snia Storage Architect-Assessment,Planning and Design)
Questions et réponses: 85 Q&As
Aujourd'hui, c'est une société pleine de gens talentueux, la meilleure façon de suivre et assurer la place dans votre carrière est de s'améliorer sans arrêt. Si vous n'augmentez pas dans votre carrière, vous êtes juste sous-développé parce que les autres sont meilleurs que vous. Pour éviter ce cas, vous devez vous former successivement.
La partie plus nouvelle de test Certification SNIA S10-300 est disponible à télécharger gratuitement dans le site de Pass4Test. Les exercices de Pass4Test sont bien proches de test réel SNIA S10-300. En comparaison les Q&As dans les autres sites, vous trouverez que les nôtres sont beaucoup plus complets. Les Q&As de Pass4Test sont tout recherchés par les experts de Pass4Test, y compris le test simulation.
S10-300 Démo gratuit à télécharger: http://www.pass4test.fr/S10-300.html
NO.1 What is the primary objective of the storage capacity planning process?
A. To demonstrate the effects of changes in storage service levels.
B. To reach agreement with application representatives and management over the storage requirements.
C. To produce a capacity plan at agreed intervals which fits into the business planning cycle, e.g. the
financial year.
D. To calculate the effects on ILM service levels, array and fabric utilization of the estimated demand over
the period of the planning horizon.
Answer: C
SNIA examen certification S10-300 S10-300 examen S10-300 S10-300 examen
NO.2 Your SAN currently has eight server ports and eight disk ports on one 16 port switch. Each server port
requires 80 MB/s of one-way bandwidth, spread out evenly among the storage devices. The customer
would like to add 28 server ports along with 28 disk ports. Each server will evenly distribute its traffic on
each disk. Using 16 port 1 Gb switches, which topology should you select to minimize the number of
switches and ISLs required?
A. star
B. full mesh
C. core-edge
D. point-to-point
Answer: C
SNIA examen S10-300 certification S10-300
NO.3 When planning a NAS solution, which two sub-processes are associated with NAS Service Capacity
Management? (Choose two.)
A. Define future requirements.
B. Manage peak demand for NAS services.
C. Establish IOPS monitoring and exception thresholds.
D. Run reports on the storage and network utilization and IOPS of components.
Answer: BC
certification SNIA certification S10-300 S10-300 S10-300 examen certification S10-300
NO.4 A customer has a terabyte database and is required to back up the data daily. The SLA has allotted 6
hours for completion of the backup from 7:00 P.M. until 1:00 A.M. However, the customer has a tape
library with only five SDLT tape devices running at native speeds of 40 GB/hour. Which two should you do
to successfully meet the expected SLA requirements? (Choose two.)
A. interleave data streams
B. enable server-based compression
C. use multiple data streams across multiple devices
D. prioritize the schedule to launch during periods of greatest inactivity
Answer: AC
SNIA certification S10-300 S10-300 S10-300
NO.5 What is the goal of a SAN designed with no single point of failure?
A. to provide redundant paths to data
B. to have a good data backup system
C. to minimize unexpected loss of data access
D. to have clustered servers so that one is always available
Answer: C
certification SNIA S10-300 examen certification S10-300 certification S10-300 S10-300
NO.6 What are three key advantages of deploying a director-based solution over a mesh of switches?
(Choose three.)
A. lower cost
B. consistent latency
C. improved availability
D. increased hop count
E. ease of management
Answer: BCE
SNIA certification S10-300 S10-300 certification S10-300
NO.7 A customer is using host based virtualization to mirror critical data between two vendors disk arrays.
Which two scenarios are true? (Choose two)
A. The host can use the same HBA to connect to both arrays
B. The customer can adhere to either vendors SAN design rules
C. The customer must adhere to both vendors SAN design rules
D. The host must use different HBAs with different firmware to connect to each array
Answer: CD
SNIA certification S10-300 certification S10-300 S10-300
NO.8 You have been tasked with identifying upgrade options for your networked storage. Which two should
you do? (Choose two.)
A. Only select hardware and software that is SMI-S compliant.
B. Share all received information openly with all vendors involved.
C. Understand needs and requirements as well capabilities of your existing technology.
D. Enlist legal advice or support of your purchasing department when creating RFI, RFP, and RFQs.
Answer: CD
certification SNIA certification S10-300 S10-300 examen
NO.9 When implementing a high performance NAS solution you must check for which two items? (Choose
two.)
A. Ensure the network is full duplex.
B. Ensure that hosts have 100Mb NICs.
C. Ensure the network is at least 100Mb.
D. Ensure routers are configured for OSPF.
Answer: AC
SNIA examen S10-300 S10-300 S10-300 S10-300 certification S10-300
NO.10 A customer has a disk subsystem with eight ports. Each port delivers 200 MB/s. The customer wants a
solution designed which allows access from 32 servers with no single point of failure. Which number of
HBAs and the associated throughput, provide server access to the disk subsystem?
A. 16 HBAs, 75 MB/s
B. 32 HBAs, 90 MB/s
C. 64 HBAs, 25 MB/s
D. 64 HBAs, 50 MB/s
Answer: C
SNIA S10-300 examen S10-300 S10-300
Pass4Test vous permet à réussir le test Certification sans beaucoup d'argents et de temps dépensés. La Q&A SNIA S10-300 est recherchée par Pass4Test selon les résumés de test réel auparavant, laquelle est bien liée avec le test réel.
没有评论:
发表评论