Pass4Test offre une formation sur IBM 000-017 matériaux examen

Le Certificat de IBM 000-017 signifie aussi un nouveau jalon de la carrière, le travail aura une space plus grande à augmenter, et tout le monde dans l'industrie IT sont désireux de l'obtenir. En face d'une grande passion pour le test Certification IBM 000-017, le contrariété est le taux très faible à réussir. Bien sûr que l'on ne passe pas le test 000-017 sans aucun éffort, en même temps, le test de IBM 000-017 demande les connaissances bien professionnelles. Le guide d'étude dans le site Pass4Test peut vous fournir un raccourci à réussir le test IBM 000-017 et à obtenir le Certificat de ce test. Choisissez le guide d'étude de Pass4Test, vous verrez moins de temps dépensés, moins d'efforts contribués, mais plus de chances à réussir le test. Ça c'est une solution bien rentable pour vous.

Le test IBM 000-017 est très important dans l'Industrie IT, tous les professionnels le connaîssent ce fait. D'ailleur, c'est difficile à réussir ce test, toutefois le test IBM 000-017 est une bonne façon à examiner les connaissances professionnelles. Un gens avec le Certificat IBM 000-017 sera apprécié par beaucoup d'entreprises. Pass4Test est un fournisseur très important parce que beaucoup de candidats qui ont déjà réussi le test preuvent que le produit de Pass4Test est effectif. Vous pouvez réussir 100% le test IBM 000-017 avec l'aide de Pass4Test.

Il y a plusieurs de façons pour réussir le test IBM 000-017, vous pouvez travailler dur et dépenser beaucoup d'argents, ou vous pouvez travailler plus efficacement avec moins temps dépensés.

L'équipe de Pass4Test se composant des experts dans le domaine IT. Toutes les Q&As sont examinées par nos experts. Les Q&As offertes par Pass4Test sont réputées pour sa grande couverture ( presque 100%) et sa haute précision. Vous pouvez trouver pas mal de sites similaires que Pass4Test, ces sites peut-être peuvent vous offrir aussi les guides d'études ou les services en ligne, mais on doit admettre que Pass4Test peut être la tête de ces nombreux sites. La mise à jour, la grande couverture des questions, la haute précision des réponses nous permettent à augmenter le taux à réussir le test Certification IBM 000-017. Tous les points mentionnés ci-dessus seront une assurance 100% pour votre réussite de test Certification IBM 000-017.

Le test Certification IBM 000-017 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test IBM 000-017. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test IBM 000-017.

Code d'Examen: 000-017
Nom d'Examen: IBM (Foundations of Tivoli process automation engine V7.1)
Questions et réponses: 102 Q&As

Pass4Test peut vous fournir un raccourci à passer le test IBM 000-017: moins de temps et efforts dépensés. Vous trouverez les bonnes documentations de se former dans le site Pass4Test qui peut vous aider efficacement à réussir le test IBM 000-017. Si vous voyez les documentations dans les autres sites, c'est pas difficile à trouver qu''elles sont venues de Pass4Test, parce que lesquelles dans Pass4Test sont le plus complété et la mise à jour plus vite.

000-017 Démo gratuit à télécharger: http://www.pass4test.fr/000-017.html

NO.1 When creating a new escalation, what is the most likely reason that the conditional SQL Expression
Builder does not list attributes to use?
A.An object has not been linked in the Applies To field.
B.The escalation has not been linked to an existing attribute.
C.The Create Condition Entry Disabled check box is selected.
D.The escalation has not been linked to an existing application.
Answer: A

IBM   000-017   000-017   000-017

NO.2 Which method is used to validate the escalation being created?
A.Choose the Select action for Validate.
B.There is no validation of the escalation.
C.Save the escalation. Validation is automatic.
D.Click the Action button, which resembles a green check mark.
Answer: A

certification IBM   certification 000-017   certification 000-017

NO.3 Which type of domain cannot have a Lookup created for it?
A.Table
B.Numeric
C.Synonym
D.Numeric Range
Answer: D

IBM examen   000-017 examen   000-017 examen   000-017 examen   000-017 examen   certification 000-017

NO.4 Which statement is true about the Conditional Expression Manager?
A.It creates and stores libraries of SQL statements.
B.It dynamically assigns a user to a Security Group based on a condition.
C.It controls workflow paths automatically when certain users are involved.
D.It creates conditions for group membership to automatically associate users into groups.
Answer: A

IBM examen   000-017 examen   certification 000-017

NO.5 Which two types of condition can be created using the Conditional Expression Manager? (Choose
two.)
A.class
B.unique
C.universal
D.expression
E.conditional
Answer: AD

IBM   000-017   certification 000-017

NO.6 What does the Schedule field refer to when creating an escalation?
A.the schedule by which the escalation will poll for conditions
B.the scheduled working hours of the escalation response team
C.the scheduled days of the week for which the escalation path is valid
D.a scheduled timer that is set when the condition checked by the escalation change, after which the
escalation fires
Answer: A

IBM examen   certification 000-017   000-017 examen   000-017   000-017

NO.7 When defining Security Groups which parameters can be specified?
A. Users, Sites, Applications and Storerooms
B. Storerooms, Group, Person and Applications
C. Users, Security, Data Restrictions and Access Rights
D. Permissions, Applications, Locations and Departments
Answer: A

certification IBM   certification 000-017   000-017   certification 000-017   certification 000-017   000-017 examen

NO.8 Which factor would normally be considered when developing a primary location hierarchy?
A.the financial relationship between locations
B.the functional relationship between locations
C.the geophysical relationship between locations
D.the organizational relationship between locations
Answer: C

IBM   000-017   000-017   000-017

NO.9 A pharmaceutical company has made a tremendous number of configurations in their development
environment in order to meet their business requirements and the government regulations. The company
is ready to move 25% of these configurations into the test environment.
How should this be accomplished?
A.Export the XML and then import it again as appropriate into the test environment.
B.All of the configurations must be brought over. It is impossible to define only 25% of the configurations.
C.A package of the appropriate configurations should be defined and created. It should be distributed and
then deployed into the test environment.
D.Create a package of the appropriate configurations. Then use the Integration Framework to export
those configurations. Finally, use the Integration Framework to import the configurations into the Test
environment again.
Answer: C

IBM   000-017   000-017   000-017

NO.10 A business requires the blocking of status changes when a work order record is in workflow, unlocking
at a certain point to perform a status change to APPR, and then relocking when the status change occurs.
Leveraging the workflow tool, what are the necessary data elements and steps to meet this requirement?
A.On the workflow connector line where the status block is to begin use the NOSTATUS action. To unlock
the status change block, prior to the next status change, on a connector line use the OKSTATUS action.
B.In the Actions application, for the work order object, create the following Change Status type actions:
OKSTATUS, WOAPPR, NOSTATUS. On the workflow connector line where the status block is to begin
use the NOSTATUS action. To unlock the status change block, prior to the next status change, on a
connector line use the OKSTATUS and WOAPPR actions.
C.In the Actions application, create an Action Group for the work order object with the following members
in the following order: OKSTATUS, Work Order Approval action, NOSTATUS. On the workflow connector
line where the status block is to begin use a NOSTATUS action. To unlock the status change block, prior
to the next status change, on a connector line use the Action Group.
D.In the Actions application, for the work order object, create the following Change Status type actions:
OKSTATUS, WOAPPR, NOSTATUS. Create an Action Group for the work order object with the following
members in the following order: OKSTATUS, WOAPPR, NOSTATUS. On the workflow connector line
where the status block is to begin use a NOSTATUS action. To unlock the status change block, prior to the
next status change, on a connector line use the Action Group.
Answer: C

IBM   000-017   000-017 examen   000-017 examen

NO.11 A client has a workflow requirement on new asset records. Part of this requirement is that the
Contracts representatives from the Lease and Warranty groups review and validate contracts the asset
may or may not be under. The asset record cannot move to the next part of the workflow process until all
assignments are completed.
Which data elements and actions can be used to configure this part of the workflow process?
A.Use an Interaction node and assign to the Leasing and Warranty roles. Configure the task to indicate
that the Perform Acceptance Action is for when all assignments are accepted. Configure the Positive
connection line coming from this Task node to indicate an action that Leasing and Warranty Contracts
have been reviewed and this asset is under a contract. Configure the Negative connection line coming
from this Task node to indicate an action that Leasing and Warranty Contracts have been reviewed and
this asset is not under a contract.
B.Use a Task node and assign to the Leasing and Warranty roles. Configure the task to indicate that the
Perform Acceptance Action is for when all assignments are accepted. Configure the Positive connection
line coming from this Task node to indicate an instruction that indicates that Leasing and Warranty
Contracts have been reviewed and this asset is under a contract. Configure the Negative connection line
coming from this Task node to indicate an instruction that Leasing and Warranty Contracts have been
reviewed and this asset is not under a contract.
C.Use an Interaction node and assign to the Leasing and Warranty roles. Configure the task to indicate
that the Perform Acceptance Action is for when any assignments are accepted. Configure the Positive
connection line coming from this Task node to indicate an instruction that indicates that Leasing and
Warranty Contracts have been reviewed and this asset is under a contract. Configure the Negative
connection line coming from this Task node to indicate an instruction that Leasing and Warranty Contracts
have been reviewed and this asset is not under a contract.
D.Use a Task node and assign to the Leasing and Warranty roles. Configure the task to indicate that the
Perform Acceptance Action is for when any assignments are accepted. Configure the Positive connection
line coming from this Task node to indicate an instruction that indicates that Leasing and Warranty
Contracts have been reviewed and this asset is under a contract. Configure the Negative connection line
coming from this Task node to indicate an instruction that Leasing and Warranty Contracts have been
reviewed and this asset is not under a contract.
Answer: B

IBM   certification 000-017   000-017 examen   000-017

NO.12 The property mxe.rmi.port can be found in maximo.properties and by the System Properties
application.
If mxe.rmi.port is set to 0 in the properties file, and is set to 1090 from the System Properties application,
which statement is true about this property?
A.This property value cannot be set to 0 in the properties file. Therefore, the value must be 1090.
B.The Tivoli process automation engine terminates with an error on startup because the two settings are
not consistent.
C.The value in the Tivoli process automation engine properties overrides the value found in the properties
file. So the property value would be 1090.
D.The value in the properties file overrides the value found when viewing Tivoli process automation
engine properties, so the property value would be 0.
Answer: D

IBM examen   000-017   000-017   000-017   000-017

NO.13 Which two data elements are required to configure a Conditional user interface Control? (Choose two.)
A.Domain
B.Person Group
C.Object Structure
D.Signature Option
E.Conditional Expression
Answer: DE

IBM   000-017   000-017

NO.14 When the agent saves the service request ticket, the system launches into a Service Request
Workflow process and evaluates the data on the record. If the agent has not entered asset, location, or
configuration item data, the system displays a dialog box with the following options:
Close ticket - informational call
Close ticket - unauthorized caller
Close ticket - misdirected call
Take no action
If an asset, location, or configuration item is specified on the record, the system displays a dialog box with
the following options:
Take Ownership of ticket
Assign Ownership of ticket
Create Work Order
Take no action on this ticket
Which three Nodes are used in this part of the workflow process? (Choose three.)
A.Wait
B.Input
C.Task
D.Condition
E.Interaction
F.Manual Input
Answer: DEF

IBM   certification 000-017   000-017   000-017   000-017

NO.15 Which type of domain has an internal value?
A.Table
B.Numeric
C.Synonym
D.Crossover
Answer: C

IBM examen   certification 000-017   000-017   000-017   certification 000-017

NO.16 Which property must be specified in maximo.properties?
A.mxe.db.user
B.mxe.rmi.port
C.mxe.http.port
D.mxe.UserLicenseKey
Answer: A

certification IBM   000-017 examen   000-017   certification 000-017

NO.17 Which three workflow application actions (APPACTION) can only be used in conjunction with an
Escalation and the WFASSIGNMENT object? (Choose three.)
A.WFAUTO
B.WFCOND
C.WFREJECT
D.WFINITIATE
E.WFACCEPT
F.WFESCALATE
Answer: CEF

IBM examen   000-017   000-017   000-017

NO.18 A customer wants to ensure that any data sent to the Tivoli process automation engine's Integration
Framework for retrieval of financial data into the Tivoli process automation engine can survive restarts
and failures.
Which statement is true?
A.A JMS messaging engine must be configured with a persistent data store.
B.The customer must have the persist data option set for the Integration Framework adapter.
C.It can be configured by setting a property inside the Tivoli process automation engine after installation.
D.The messages are stored local to the adapter and will survive failures without any additional
configuration.
Answer: A

IBM   000-017   000-017   000-017

NO.19 Which configuration option should be set when creating an escalation?
A.any related notifications to the escalation
B.the severity of the event that will be created
C.pager numbers in a comma-separated list in the escalation
D.the Peregrine or Remedy queue in which the escalation is placed
Answer: A

certification IBM   000-017   000-017   000-017

NO.20 Which function is performed when enabling Application Server security during the installation?
A.configuring Database Server to use Application Server security
B.configuring the Tivoli process automation engine application so that it handles authorizations to use the
application
C.modifying the J2EE application so that authentication will be handled by an external source such as
IBM Tivoli Directory Server or Microsoft Active Directory
D.modifying the Tivoli process automation engine application so that authentication is handled through
the application rather than an external source such as IBM Tivoli Directory Server or Microsoft Active
Directory
Answer: C

IBM examen   000-017 examen   certification 000-017

Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test IBM 000-017, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test IBM 000-017 coûtant un peu d'argent.

Le dernier examen IBM 000-M27 gratuit Télécharger

Le Pass4Past possède une équipe d'élite qui peut vous offrir à temps les matériaux de test Certification IBM 000-M27. En même temps, nos experts font l'accent à mettre rapidement à jour les Questions de test Certification IT. L'important est que Pass4Test a une très bonne réputation dans l'industrie IT. Bien que l'on n'ait pas beaucoup de chances à réussir le test de 000-M27, Pass4Test vous assure à passer ce test par une fois grâce à nos documentations avec une bonne précision et une grande couverture.

Obtenez la Q&A de test IBM 000-M27 de Pass4Test plus tôt, vous pouvez réussir le test Certification IBM 000-M27 plus tôt.

Vous aurez une assurance 100% à réussir le test IBM 000-M27 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Pass4Test, où vous pouvez trouver les conseils et les documentations de test Certification IBM 000-M27, est un siteweb remarquable offrant les données à préparer le test IT. Les documentations partiels et les mis en nouveau sont offerts gratuitement dans le site de Pass4Test. D'ailleurs, nos experts profitent de leurs expériences et leurs efforts à lancer sans arrêts les Q&A plus proches au test réel. Vous allez passer votre examen plus facile.

L'équipe de Pass4Test rehcerche la Q&A de test certification IBM 000-M27 en visant le test IBM 000-M27. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test IBM 000-M27 sans aucune doute.

Avec la version plus nouvelle de Q&A IBM 000-M27, réussir le test IBM 000-M27 n'est plus un rêve très loin pour vous. Pass4Test peut vous aider à réaliser ce rêve. Le test simualtion de Pass4Test est bien proche du test réel. Vous aurez l'assurance à réussir le test avec le guide de Pass4Test. Voilà, le succès est juste près de vous.

Code d'Examen: 000-M27
Nom d'Examen: IBM (Build Forge Technical Sales Mastery Date)
Questions et réponses: 46 Q&As

000-M27 Démo gratuit à télécharger: http://www.pass4test.fr/000-M27.html

NO.1 Which stage of the typical application development process is NOT automated in Build Forge?
A.Unit Testing
B.Requirements
C.Release
D.PackagingWArialTimes New RomanZ
Answer: B

IBM   certification 000-M27   certification 000-M27   000-M27   000-M27   000-M27

NO.2 What are the main business values that Build Forge brings to an organization?
A.secure, centralized role based console, developer self-service, accelerated build times
B.reduced cost of delivery, increased product quality, decreased time to market, and management
decision and support
C.Intelligent Bill of Materials, parallel processing through threading, and dynamic server management
D.dependency management, makefile acceleration, and reduced delivery costWArialTimes New
RomanZX
Answer: B

certification IBM   certification 000-M27   000-M27   000-M27 examen   000-M27   000-M27

NO.3 Which component of the Build Forge functional architecture provides a pre-flight build capability that
allows you to selectively choose local file changes and preview the build results before committing the file
changes to source code control?
A.IDE plug-in
B.MMC plug-in
C.Staging Tool
D.Build Forge AgentWArialTimes New RomanZ
Answer: A

IBM   000-M27   certification 000-M27   certification 000-M27   000-M27

NO.4 How does Build Forge improve a customers software build-and-release process?
A.by facilitating centralized collaboration
B.by providing up-to-date compilers and debuggers
C.by dynamically producing product documentation
D.by facilitating scripted unit testingWArialTimes New RomanZ
Answer: A

IBM examen   000-M27   000-M27 examen   000-M27 examen   certification 000-M27

NO.5 A software development company has a major customer that requires a previous release of their
software to be modified to run on Windows Vista.
Which software build-and-release best practice addresses this issue?
A.building early and often
B.build reproducibility
C.automation and integration
D.link to deployment environmentsWArialTimes New RomanZ
Answer: B

IBM examen   000-M27   000-M27

Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de IBM 000-M27 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test IBM 000-M27 qui vous amenera le succès du test IBM 000-M27, au lieu de traivailler avec peine et sans résultat.

L'avènement de la certification IBM pratique d'examen 000-671 questions et réponses

Pass4Test a une équipe se composant des experts qui font la recherche particulièrement des exercices et des Q&As pour le test certification IBM 000-671, d'ailleurs ils peuvent vous proposer à propos de choisir l'outil de se former en ligne. Si vous avez envie d'acheter une Q&A de Pass4Test, Pass4Test vous offrira de matériaux plus détailés et plus nouveaux pour vous aider à approcher au maximum le test réel. Assurez-vous de choisir le Pass4Test, vous réussirez 100% le test IBM 000-671.

Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test IBM 000-671 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test IBM 000-671 réel est lancée. C'est possible à réussir 100% avec le produit de IBM 000-671. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.

Choisir le Pass4Test vous permet non seulement à réussir le test IBM 000-671, mais encore à enjouir le service en ligne 24h et la mise à jour gratuite pendant un an. Nous allons lancer au premier temps la Q&A IBM 000-671 plus nouvelle. Si vous ne passez pas le test, votre argent sera tout rendu.

Le test de Certification IBM 000-671 devient de plus en plus chaud dans l'Industrie IT. En fait, ce test demande beaucoup de travaux pour passer. Généralement, les gens doivent travailler très dur pour réussir.

Code d'Examen: 000-671
Nom d'Examen: IBM (IBM Systems Networking Sales V1)
Questions et réponses: 100 Q&As

Le produit de Pass4Test peut assurer les candidats à réussir le test IBM 000-671 à la première fois, mais aussi offrir la mise à jour gratuite pendant un an, les clients peuvent recevoir les ressources plus nouvelles. Pass4Test n'est pas seulement un site, mais aussi un bon centre de service.

000-671 Démo gratuit à télécharger: http://www.pass4test.fr/000-671.html

NO.1 What is the maximum number of ASMPs and ASM asapters that can be configured
into one ASM Interconnect Network?
A. 12
B. 18
C. 24
D. 36
Answer: A

IBM examen   000-671   000-671 examen   000-671   certification 000-671

NO.2 Which two 2 of the following IBM xSeries servers include a standard ISMP, and can
upgrade system management capabilities by installing a Remote Supervisor
Adapter?
A. xSeries 225
B. xSeries 235
C. xSeries 305
D. xSeries 345
Answer: B,D

IBM   000-671   000-671   000-671   000-671

NO.3 Web-based management, DNS/DHCP support and e-mail alerts are functions of the
IBM__________
A. Remote Supervisor adapter
B. Netfinity Advanced System Management PCI adapter
C. xSeries 225 interated System Management function
D. xSeries 345 integrated System Management processor.
Answer: A

certification IBM   000-671   000-671   000-671   000-671 examen   000-671

NO.4 The technology built into most IBM xSeries servers that can drastically reduce
service time by visually guiding the technician to a faulty component is called
A. IBM Director
B. Serverguide
C. Light-path diagnostics.
D. Predictive failure analysis.
Answer: C

IBM   000-671   certification 000-671   certification 000-671   000-671

NO.5 Capacity Manager ServeRaid Manager and cluster Systems Management are
comprehensive tools provided by which IBM Director feature?
A. Update Connector
B. Resource Monitoring
C. Electronic Service Agent
D. Director Extensions
Answer: D

IBM   000-671   000-671   000-671   000-671 examen

NO.6 Which of the following is a RAID controller device that contains Fiber Channel
Interfaces to connect the host systems and disk drive enclosures?
A. EXP300
B. SAN FC Switch
C. FAST Storage Server
D. RXE-100 Remote Expansion Enclosure
Answer: C

IBM   certification 000-671   000-671 examen   000-671

NO.7 How many of the IBM xSeries 345 server PCI expansion slots are Active PCI slots?
A. 0
B. 2
C. 4
D. 6
Answer: A

certification IBM   000-671   certification 000-671   certification 000-671

NO.8 Which items from the following list are X-architecture Guiding Principles?
1- To drive and enhance industry standards
2- To make servers easier to service
3- To make servers easier to deploy and use
4- To make IBM servers easier to sell
5- To strive toward uninterrupted computing for intel processor-based servers
6- To lead the industry in driving down the cost of enterprise computing
A. 2,3,4,only
B. 1,3,5,6 only
C. 1,2,4,5, only
D. 2,5,6, only
Answer: B

IBM examen   000-671   000-671

NO.9 Which two of the following allow RAID-5E to provide better protection than the
standard RAID-5?
A. Hot-space defined as part of the array
B. More than one logical drive in the array
C. Stripes data and parity across all of the drives in the array
D. Two drives in the array could fail, but not at the same time.
Answer: A,D

IBM   000-671   000-671 examen

NO.10 The IBM Director function that allows administrators to use a command line
session to execute commands on the managed system is __________
A. File transfer
B. Process management
C. Remote session
D. Remote control
Answer: C

IBM examen   000-671   000-671   000-671   000-671

NO.11 Which IBM xSeries server is an affordable entry-level uniprocessor server with
rack-mount support provided by an optional rack conversion ket?
A. xSeries 205
B. xSeries 225
C. xSeries 335
D. xSeries 345
Answer: A

IBM examen   000-671   000-671   certification 000-671   certification 000-671

NO.12 An ISP requires an ultra-dense 2-way high performance rack server to provide as
much capacity as possible in a crowded data center. The budget is tight so total cost
of ownership is a consideration. The customer needs a solution that is easy to install
and configure, and which makes adding or replacing servers simple. Which one of
the following IBM xSeries servers would best meet these requirements?
A. xSeries 305
B. xSeries 335
C. xSeries 345
D. xSeries 360
Answer: B

IBM   certification 000-671   000-671

NO.13 What LAN hardware device is used to connect two network or systems?. This device
is protocol-independent but hardware-specific.
A. Bridge
B. Ateway
C. Repeater
D. Router
Answer: A

certification IBM   000-671 examen   000-671   000-671

NO.14 Which two of the following IBM xSeries servers listed below are equipped with an
intel Pentium 4 processor?
A. xSeries 205
B. xSeries 225
C. xSeries 305
D. xSeries 335
Answer: A,C

IBM   000-671   certification 000-671   000-671   000-671

NO.15 A company wants to track applications installed on their network systems using a
dictionary file with many predefined software product files. They also want to
collect hardware and software data when a managed system is first discovered and
at reular intervals after that. Which of the following IBM Director features would
be used to perform this function?
A. Resource Monitoring
B. Inventory Management
C. Software DISTRIBUTION
D. DMI Browser
Answer: B

IBM   000-671   000-671   000-671   000-671

NO.16 Which of the following system management functions is supported only by the
Remote Supervisor Adapter
A. e-mail alerts
B. Generate SNMP traps
C. IBM Director via LAN
D. Automatic shutdown/restart
Answer: A

IBM   certification 000-671   certification 000-671

NO.17 When comparing the high availability features of the xSeries 235 and xSeries 255
servers, which feature is a standard feature of the x235 ONLY?
A. Chipkill memory
B. Active PCI-X support
C. Hot swap hard disk drives
D. Integrated RAID-1 support
E. Integrated systems management processor
Answer: D

IBM   000-671   000-671   000-671 examen   certification 000-671

NO.18 When comparing the IBM ServeRAID-4Mx and ServRAID-4Lx adapters, which
feature is available on the ServeRAID-4Mx ONLY?
A. Ultra 160 SCSI
B. Dual Address Cycle (DAC)
C. 64-bit PCI 2.2 at 66/33 MHz interface
D. 64 MB battery-backed ECC data cache memory
Answer: D

IBM   000-671 examen   certification 000-671   certification 000-671

NO.19 A Proxy server is an example of what server type?
A. Centralized
B. Client/server
C. Device sharing
D. Web
Answer: D

IBM   certification 000-671   certification 000-671   000-671

NO.20 Ten members of the Research staff in a small company have individual dial-up
connections to the Internet. This is costing the company a lot of money. Which
server type would provide the BEST solution to reduce the cost of internet access,
and at the same time allow the company to better manage their wide area
connections?
A. A centralized file server with a single, high-speed internet connection, managed by a
member of the IT team who downloads the pages required by the Research Department.
B. A company-wide proxy server with a single high-speed internetconnection, providing
internet access to all staff in the Research Department.
C. A database server, using an off-line dial-up connection, which caches and sorts the
pages required by the Research Department
D. An HTTP server which downloads and mirrors the previous day page requests from
the Research Department
Answer: B

IBM examen   000-671   certification 000-671   000-671

Si vous faites toujours la lutte contre le test IBM 000-671, Pass4Test peut vous aider à résoudre ces difficultés avec ses Q&As de qualité, et atteindre le but que vous avez envie de devenir un membre de IBM 000-671. Si vous avez déjà décidé à s'améliorer via IBM 000-671, vous n'avez pas aucune raison à refuser Pass4Test. Pass4Test peut vous aider à passer le test à la première fois.

Le plus récent matériel de formation IBM COG-480

Nous assurons seulement le succès de test certification, mais encore la mise à jour est gratuite pour vous. Si vous ne pouvez pas passer le test, votre argent sera 100% rendu. Toutefois, cette possibilité n'est presque pas de se produire. Vous pouvez tout d'abord télécharger le démo gratuit pour prendre un essai.

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test IBM COG-480. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test IBM COG-480.

Pass4Test provide non seulement le produit de qualité, mais aussi le bon service. Si malheureusement vous ne pouvez pas réussir le test, votre argent sera tout rendu. Le service de la mise à jour gratuite est aussi pour vous bien que vous passiez le test Certification.

Code d'Examen: COG-480
Nom d'Examen: IBM (IBM Cognos 8 Planning Professional)
Questions et réponses: 60 Q&As

Le programme de formation IBM COG-480 offert par Pass4Test comprend les exercices et les test simulation. Vous voyez aussi les autres sites d'offrir l'outil de formation, mais c'est pas difficile à découvrir une grand écart de la qualité entre Pass4Test et les autres fournisseurs. Celui de Pass4Test est plus complet et convenable pour la préparation dans une courte terme.

On peut voir que beaucoup de candidats ratent le test IBM COG-480 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test IBM COG-480 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test IBM COG-480, Pass4Test peut offrir les Q&As des autres test Certification IT.

Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test IBM COG-480. Cet outil de formation est convenable pour les candidats de test IBM COG-480. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.

COG-480 Démo gratuit à télécharger: http://www.pass4test.fr/COG-480.html

NO.1 Which aspect of the Waterfall approach makes it less appropriate to use for developing planning
applications?
A. There is no Analyze phase; the steps go from Plan directly to Design.
B. Steps are followed sequentially without returning to previous steps.
C. Technical constraints tend to overrule user requirements.
D. This approach can only be implemented using large teams.
Answer: B

certification IBM   COG-480 examen   COG-480   certification COG-480   COG-480

NO.2 Why does using a methodology increase the chances of a project being successful?
A. Requirements do not have to be documented before a project is started.
B. Requirements can be changed throughout the project lifespan.
C. Development follows predetermined phases based on proven practice.
D. Development must be completed within predetermined timescales.
Answer: C

certification IBM   COG-480 examen   COG-480 examen

NO.3 What is the benefit of using a methodology when developing an IBM Cognos 8 Planning solution?
A. Allows accurate and complete development.
B. Allows development to be started before users are consulted.
C. Development can be done by less qualified consultants.
D. An iterative methodology can be used instead of waterfall.
Answer: A

IBM   COG-480 examen   certification COG-480   COG-480   COG-480

NO.4 What is the purpose of providing an initial delivery to end-users which addresses only 80 to 90% of their
needs?
A. The users will be content with a solution that addresses most of their requirements.
B. The requirements can be completely changed and still finished in time.
C. The solution can more easily be fine-tuned through iterative development.
D. The solution can be completed through sequential steps and in time.
Answer: C

IBM   certification COG-480   COG-480 examen   COG-480

NO.5 During the design phase of an IBM Cognos 8 Planning solution, the Planning and BI teams meet to
discuss the reporting requirements. Which proposed change must be discussed by the whole
implementation team?
A. The number of users who will consume reports based on Planning information.
B. The D-Lists that will be used to represent the measures in reports.
C. The D-Lists that will represent time in the planning application.
D. The number of users who will perform data entry into the planning application.
Answer: B

certification IBM   certification COG-480   COG-480 examen

NO.6 Which statement describes how Proven Practices are created?
A. Proven Practice is driven by product management to provide strict guidelines for modelers.
B. Proven Practice is developed by a specialist team who understand how the products work.
C. A variety of teams input ideas based on how customers are effectively using the products.
D. Support personnel provide tips and techniques to customers to help them create effective models.
Answer: C

certification IBM   COG-480 examen   certification COG-480   COG-480

NO.7 You are designing a production planning solution with IBM Cognos 8 Planning. Units will be input by the
regional production managers. Production rates for each factory are set centrally and do not change.
What is the primary consideration for the designer?
A. How easy will it be to update production rates.
B. How easy will it be to input units.
C. How quickly can assumption data be input.
D. How quickly can the list of factories be updated.
Answer: B

IBM   COG-480 examen   certification COG-480   certification COG-480   COG-480

NO.8 You identify that last year's actuals will be used as a basis for this year's plan. This data resides in a
database and will be loaded into Contributor. The data is very sensitive and security is important to the
customer. What are two solutions? (Choose two.)
A. Load from a Cognos package using the database as a source.
B. Use an ETL tool to load directly from the database avoiding the Copy and Load process.
C. Use the standard Copy, Load, and Prepare process in the Contributor administration console.
D. Load into Analyst and then export to a flat file and Copy, Load, and Prepare into Contributor.
Answer: AB

IBM examen   certification COG-480   COG-480 examen   certification COG-480

NO.9 When developing an IBM Cognos 8 Planning solution, when is prototyping most useful?
A. When the user requirements are unclear.
B. When the development team is very large.
C. When the client can afford the extra time and cost required.
D. When the solution is being implemented for a department other than Finance.
Answer: A

certification IBM   certification COG-480   certification COG-480

NO.10 You implement an IBM Cognos 8 Planning solution which fulfills the users' needs. Two years later the
performance of the Go To Production and Reconciliation processes take an unacceptable time to run.
What may have been overlooked in the original design phase?
A. the frequency that the planning process is run
B. the number of BI reports based on planning data
C. the increase in the number of e.List items with time
D. the volume of assumption data in the Analyst model
Answer: C

certification IBM   COG-480   COG-480   COG-480

Pass4Test peut offrir la facilité aux candidats qui préparent le test IBM COG-480. Nombreux de candidats choisissent le Pass4Test à préparer le test et réussir finalement à la première fois. Les experts de Pass4Test sont expérimentés et spécialistes. Ils profitent leurs expériences riches et connaissances professionnelles à rechercher la Q&A IBM COG-480 selon le résumé de test réel IBM COG-480. Vous pouvez réussir le test à la première fois sans aucune doute.

Les meilleures IBM LOT-957 examen pratique questions et réponses

Tant que vous avez besion de participer l'examen, nous pouvons toujours mettre à jour de matériaux à propos de test Certification IBM LOT-957. Le guide d'étude de Pass4Test comprend les excercices de IBM LOT-957 et la Q&A qui peut vous permetrre à réussir 100% le test IBM LOT-957. Vous pouvez faire une meilleure préparation pour le test. D'ailleurs, la mise à jour pendant un an après vendre est gratuite pour vous.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel IBM LOT-957 peut vous assurer à réussir 100% le test IBM LOT-957. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

Code d'Examen: LOT-957
Nom d'Examen: IBM (Administering IBM Lotus Connections 2.0)
Questions et réponses: 90 Q&As

Les produits de Pass4Test sont préparés pour le test Certification IBM LOT-957, y compris les formations et les informations ciblées au test IBM LOT-957. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.

Vous allez choisir Pass4Test après essayer une partie de Q&A IBM LOT-957 (gratuit à télécharger). Le guide d'étude produit par Pass4Test est une assurance 100% à vous aider à réussir le test Certification IBM LOT-957.

Pass4Test est un catalyseur de votre succès de test IBM LOT-957. En visant la Certification de IBM, la Q7A de Pass4Test avec beaucoup de recherches est lancée. Si vous travillez dur encore juste pour passer le test IBM LOT-957, la Q&A IBM LOT-957 est un bon choix pour vous.

LOT-957 Démo gratuit à télécharger: http://www.pass4test.fr/LOT-957.html

NO.1 The ACME Corporation has planned to create multiple database instances for development and
production. It has also chosen to use the provided scripts to install the databases. Which of the following
is true regarding this type of deployment?
A.The company must run the scripts once for each instance
B.The company must run the scripts one time for all instances
C.The company must modify the script to run once on each instance at the same time
D.The company must modify the scripts to create multiple database administrator accounts
Answer: A

IBM examen   certification LOT-957   certification LOT-957   LOT-957

NO.2 Baxter was attempting to complete the Tivoli Directory Integrator installation. Upon creating the file
paths for the main and subdirectories, which of the following should he avoid?
A.Make sure the file path does not contain the name Tivoli
B.Make sure all the file paths are not mapped to the temp directory for caching of the directory imports
C.Make sure the installer is not located in the same location the Tivoli Directory Integrator will be installed
D.Make sure the file path in which you create the subdirectory contains directories that have names that
do not contain spaces in them
Answer: D

IBM examen   LOT-957   LOT-957   LOT-957   LOT-957

NO.3 At which point in the installation should you enable administrative security and application security?
A.After configuring user repositories
B.Previous to installing any Lotus Connections features
C.Following installation of any Lotus Connections features
D.Before configuring the Home page for users in Lotus Connections
Answer: B

IBM examen   LOT-957   LOT-957   LOT-957

NO.4 In order to federate multiple Lotus Connections profiles into a single cell, which of the following should
be utilized?
A.Linked Profile Management
B.Network Deployment Manager
C.Integrated Solutions Profile
D.Profile Configuration Indexes
Answer: B

IBM   LOT-957 examen   LOT-957   LOT-957   LOT-957

NO.5 Which of the following LDAP attributes are required for all users when configuring it for use with
WebSphere Application Server?
A.cn
B.uid
C.mail
D.shortname
Answer: C

IBM   LOT-957   LOT-957   LOT-957

NO.6 In the single profile with one server process configuration, the WebSphere Application Server
Integrated Solutions Console is available on which of the following default server processes?
A.Aserver
B.server
C.serverA
D.server1
Answer: D

IBM   LOT-957   certification LOT-957   LOT-957   LOT-957   LOT-957

NO.7 You can group WebSphere Application Server processes so that you can administer them as a unit.
WebSphere Application Server refers to such a group as which of the following?
A.Units
B.Teams
C.Profile
D.Processors
Answer: C

IBM examen   LOT-957   LOT-957   LOT-957 examen

NO.8 Which of the following is the end result of adjusting the pageSize attribute in the Home page
configuration file from 50 to 500?
A.This will increase the number of widgets allowed on the Home page
B.This will increase the width of the columns on the Home page from 50 to 500 pixels
C.This will increase the number of entries that the indexing process transmits across the network during
the crawling operation
D.This will increase the length of the Home page from half default size to 5 times the default size to fit
more widgets and other Home page content
Answer: C

IBM examen   LOT-957 examen   LOT-957 examen   LOT-957 examen   LOT-957

NO.9 Before you begin the process of uninstalling a stand-alone Lotus Connections environment, there is a
preferences file that will be is useful if you reinstall Lotus Connections at a later time. Which of the
following files should you consider retaining?
A.wimcfg.xml
B.ResponseInstaller.txt
C.LotusConnections-config.xml
D.lastSessionDefaults.properties
Answer: D

IBM examen   LOT-957   certification LOT-957

NO.10 Which file is built while running the Lotus Connections installation in standard mode that can be
utilized later in silent mode when you need an identical installation on several servers?
A.lcsilent.txt
B.LCconfig.xml
C.response.properties
D.ConfigWizard.properties
Answer: C

certification IBM   certification LOT-957   LOT-957   LOT-957

NO.11 Bailey has begun the steps in the Lotus Connections installation to start populating the profiles
database. Which of the following must be configured prior to beginning this step?
A.The profiles database and LDAP server are configured
B.The LDAPconfig.xml and DB2 administrator are configured
C.The security administrator and profiles.properties are configured
D.The Tivoli Directory Integrator and IBM HTTP server are configured
Answer: A

IBM   LOT-957 examen   LOT-957   LOT-957 examen

NO.12 If you already have WebSphere Application Server configured to use a Standalone LDAP User
Registry, you must change the configuration to utilize which of the following in its place?
A.Local members
B.Virtual members
C.Global directories
D.Federated repositories
Answer: D

IBM   LOT-957   LOT-957   LOT-957   certification LOT-957

NO.13 Aaron chose not to set up a network deployment and instead installed the Lotus Connections features
into separate profiles. Which of the following must be done to include information about the other
features?
A.Edit the configuration file created for each feature profile
B.Run the Lotus Connections Management Utility and specify the alternate locations
C.Open the wimcfg.xml file for each feature and change the port number so that they do not conflict with
each other
D.Open the plug-in.properties file for each profile, import the feature from the other profile, and save the
file
Answer: A

IBM   certification LOT-957   certification LOT-957

NO.14 For each user in LDAP, Tivoli Directory Integrator will map each LDAP attribute or JavaScript function
to the corresponding column in the database. The wizard automatically validates each mapping. Which of
the following does the wizard create in the database for each user?
A.Row
B.Table
C.Column
D.Section
Answer: A

IBM examen   LOT-957   LOT-957 examen   certification LOT-957

NO.15 The profiles population wizard does not support which of the following?
A.SSL binding
B.Open binding
C.Anonymous binding
D.Authenticated binding
Answer: C

IBM   LOT-957   LOT-957 examen

NO.16 An administrator can reset a user's password in case of a lost or compromised HTTP password. In
which of the following locations must this be changed?
A.In the Home page
B.In the LDAP directory
C.In the database store
D.In the local Virtual Member Manager
Answer: B

IBM examen   LOT-957 examen   certification LOT-957   certification LOT-957   certification LOT-957

NO.17 The user ID of the owner of the database instance to which you want to install the databases must
have privileges to create which of the following?
A.indexes, users, and groups
B.tables, users, and profiles
C.database, tablespace, and tables
D.profiles, databases, and connections
Answer: C

IBM examen   LOT-957   LOT-957 examen   LOT-957   LOT-957

NO.18 Before creating the Lotus Connections feature databases, the DB2 installation must be registered by
utilizing which of the following?
A.db2reg.lcp
B.db2ese_o.lic
C.db2_init.exe
D.db2license.txt
Answer: B

IBM   LOT-957   certification LOT-957   LOT-957   LOT-957 examen

NO.19 To establish a global unique ID for the LDAP directory, you must modify which of the following files?
A.wimconfig.xml
B.wasLDAP.properties
C.LotusConnectionsprefs.xml
D.LDAPrepositories.properties
Answer: A

IBM   LOT-957 examen   certification LOT-957   certification LOT-957   LOT-957

NO.20 Larry was installing Lotus Connections in a Network Deployment model. He had completed installing
Blogs and Communities in two separate server processes in the same profile and placed them into a
managed node. He now wishes to add Activities but is unable to add this feature. Which of the following is
the cause for this issue?
A.It is not supported to run the installer on a managed node
B.He must add another server to the managed node and then install Activities
C.He must uninstall the other features and merge them into a single server process
D.He must first add a server to the managed node, install either Blogs or Communities on this server, and
then change that installation to Activities
Answer: A

certification IBM   certification LOT-957   LOT-957 examen   certification LOT-957   LOT-957   LOT-957

Est-ce que vous vous souciez encore pour passer le test IBM LOT-957? Pourquoi pas choisir la formation en Internet dans une société de l'informatique. Un bon choix de l'outil formation peut résoudre le problème de prendre grande quantité de connaissances demandées par le test IBM LOT-957, et vous permet de préparer mieux avant le test. Les experts de Pass4Test travaillent avec tous efforts à produire une bonne Q&A ciblée au test IBM LOT-957. La Q&A est un bon choix pour vous. Vous pouvez télécharger le démo grantuit tout d'abord en Internet.

Meilleur IBM LOT-981 test formation guide

Dans cette société, il y a plein de gens talentueux, surtout les professionnels de l'informatique. Beaucoup de gens IT se battent dans ce domaine pour améliorer l'état de la carrière. Le test LOT-981 est lequel très important dans les tests de Certification IBM. Pour être qualifié de IBM, on doit obtenir le passport de test IBM LOT-981.

Vous aurez une assurance 100% à réussir le test IBM LOT-981 si vous choisissez le produit de Pass4Test. Si malheuresement, vous ne passerez pas le test, votre argent seront tout rendu.

Le test IBM LOT-981 est test certification très répandu dans l'industrie IT. Vous pourriez à améliorer votre niveau de vie, l'état dans l'industrie IT, etc. C'est aussi un test très rentable, mais très difficile à réussir.

Code d'Examen: LOT-981
Nom d'Examen: IBM (IBM Lotus Notes Domino 8.5 Building the Infrastructure)
Questions et réponses: 130 Q&As

Pour l'instant, vous pouvez télécharger le démo gratuit de Q&A IBM LOT-981 dans Pass4Test pour se former avant le test IBM LOT-981.

LOT-981 Démo gratuit à télécharger: http://www.pass4test.fr/LOT-981.html

NO.1 Which one of the following database elements is not updated when the DESIGN task is run?
A.Forms
B.Views
C.Roles
D.Agents
Answer: C

IBM   LOT-981 examen   LOT-981   LOT-981   LOT-981 examen

NO.2 When an S/MIME signed message has a disclaimer added by the server and is received by a Notes
user, which of the following is the result?
A.The signature cannot be verified
B.The signature is stripped from the message
C.The message cannot be read by the recipient
D.The message cannot be transmitted and is returned to the user
Answer: A

certification IBM   certification LOT-981   certification LOT-981   LOT-981   LOT-981 examen

NO.3 Event handlers contain numerous notification methods. Which of the following is NOT a supported
notification method?
A.Pager
B.Broadcast
C.Outbound phone call
D.Log to Windows NT Event Viewer
Answer: C

IBM   LOT-981 examen   LOT-981 examen   certification LOT-981

NO.4 Which one of the following statements regarding the Certificate Authority (CA) is true?
A.The CA issues Lotus Notes certificates only.
B.The CA issues Internet certificates only.
C.Access to the certifier ID must be granted.
D.The CA issues both Lotus Notes and Internet certificates.
Answer: D

IBM   LOT-981 examen   LOT-981   LOT-981   certification LOT-981

NO.5 The Domino Console connects to the Controller over what default port?
A.80
B.1352
C.1533
D.2055
Answer: D

IBM   certification LOT-981   LOT-981 examen   LOT-981   LOT-981 examen

NO.6 Which one of the following server console commands should be utilized to clear the database cache?
A.DBCache Flush
B.DBCache Clear
C.Database Flush
D.Database Clear Cache
Answer: A

certification IBM   LOT-981   LOT-981   LOT-981

NO.7 Which one of the following happens when the purge interval is shorter than the replication interval?
A.The view indexes may not refresh after a replication.
B.The database will force an unscheduled replication to occur.
C.Documents deleted from a replica of the database can reappear.
D.Users may not see the newest documents when they open a database
Answer: D

IBM examen   certification LOT-981   LOT-981   certification LOT-981   LOT-981 examen

NO.8 Database1.nsf needs to replicate between two servers.
ServerX should only be able to add and modify information in ServerZ's replica copy of Database1.nsf.
ServerZ should be able to pull new and modified information from ServerX's replica copy of
Database1.nsf, but not be able to write new or modified information to ServerX's copy.
Which one of the following represents the access levels each server should have?
A.ServerX should have Author access to Database1.nsf on ServerZ, and ServerZ should have Reader
access to Database1.nsf on ServerX
B.ServerX should have Manager access to Database1.nsf on ServerZ, and ServerZ should have Reader
access to Database1.nsf on ServerX
C.ServerX should have Editor access to Database1.nsf on ServerZ, and ServerZ should have Reader
access to Database1.nsf on ServerX
D.ServerX should have Editor access to Database1.nsf on ServerB, and ServerZ should have Depositor
access to DAtabase1.nsf on ServerX
Answer: C

certification IBM   LOT-981 examen   certification LOT-981   LOT-981

NO.9 What action does a stop trigger perform?
A.Shuts down a task if a threshhold is reached.
B.Notifies an administrator if an event happens.
C.Pauses the Domino console when a particular event occurs.
D.Automatically restarts the server according to predefined criteria.
Answer: C

IBM   LOT-981   certification LOT-981   LOT-981 examen   LOT-981

NO.10 What type of information is stored in an .NSD file?
A.Current server status
B.Notes storage directories
C.Information regarding a system crash
D.HTTP access information for the server
Answer: C

certification IBM   LOT-981   LOT-981 examen   LOT-981 examen

NO.11 Karen, the Domino administrator, is configuring client authentication through Directory Assistance. She
wishes to restrict lookups to a specific directory to ONLY users in the Europe/WXYZ hierarchy. Which of
the following represents the proper trusted rule to be created in Directory Assistance?
A./ / / /WXYZ/*
B./ / /Europe/WXYZ/*
C./ / */Europe/WXYZ/*
D.*/*/*/Europe/WXYZ/*
Answer: B

IBM   certification LOT-981   certification LOT-981   LOT-981   LOT-981

NO.12 You are configuring Directory Assistance to utilize replicas of databases across numerous servers.
However, you wish for the first lookup to be done locally for a replica. What should be placed in the Server
Name field of the Directory Assistance document?
A.*
B.Local
C.Notes
D.Primary
Answer: A

IBM examen   LOT-981 examen   LOT-981 examen

NO.13 The Cluster Database Directory Manager creates which of the following databases?
A.CLDBDIR.NSF
B.CLUSTERDB.NSF
C.CLUDIRMGR.NSF
D.CLUDIRECTORY.NSF
Answer: A

IBM   certification LOT-981   LOT-981   LOT-981

NO.14 William wishes to migrate his company's Notes certifier to the new Certificate Authority process. He
has chosen to encrypt the certifier id with a lock id. What Domino server console command must be
issued next?
A.load unlock ca
B.load ca unlock
C.tell ca activate
D.tell ca unlock
Answer: D

certification IBM   LOT-981   certification LOT-981   LOT-981   LOT-981

NO.15 Which of the following are the default names for the DB2 instance, database and schema?
A.DB2, Domino, Domino
B.NSF, Domino, DomDB2
C.Domino, NSFDB2, NDDB2
D.SYSCTR, Domino, DB2AccServ
Answer: A

IBM   certification LOT-981   LOT-981   LOT-981 examen

NO.16 Domino Domain Monitoring (DDM) enhanced events contains which of the following?
A.Specific target information only
B.Events generated by an event probe only
C.Events generated by an event generator only
D.All of the above
Answer: D

IBM   certification LOT-981   LOT-981   LOT-981 examen   certification LOT-981

NO.17 Edison, the Domino Administrator, wants to enforce file security on HTML and Image files. Which one
of the following should he do?
A.Enforce ECLs
B.Create File Protection documents
C.Use Protect Directories in the HTTPD.CNF files
D.Domino does not allow security enforcement on HTML and Image files
Answer: B

IBM   certification LOT-981   certification LOT-981

NO.18 Kyle, the Domino administrator, needs to connect to the Domino Controller through a firewall. What
program must be configured properly for this functionality?
A.Binder service
B.Service binder
C.Bind controller
D.Controller binder
Answer: B

IBM   LOT-981   LOT-981

NO.19 In which of the following scenarios would the Notes client push an updated copy of their user id file to
the server ID vault?
A.When the user changes home servers
B.When the user adds an Internet certificate
C.When the user changes the logoff timeout on their Notes client
D.When the user accepts a cross certificate to another Notes domain
Answer: B

IBM examen   certification LOT-981   LOT-981 examen   certification LOT-981   LOT-981   LOT-981

NO.20 The previous internal Domino time is saved in Last_Domino_Time when the Domino server shuts down,
when the server is successfully restarted and when the OS time refreshes the internal Domino time.
Which of the following prevents Domino from starting if the time change has moved beyond a preset
range?
A.Rematch_OS_Time
B.Reset_Actual_Time
C.Restart_Time_Action
D.Restart_Time_Interval
Answer: D

certification IBM   LOT-981   LOT-981   LOT-981 examen

NO.21 Brie left the Create New Replicas field blank on a server document. Who can create new replica
databases on that server?
A.No one
B.Administrators
C.LocalDomainServers
D.Everyone in the domain
Answer: A

certification IBM   certification LOT-981   LOT-981   LOT-981   LOT-981   LOT-981

NO.22 Users in your organization utilize Lotus Traveler for their mobile devices. They are successfully able to
search for user names and telephone numbers. What is the default amount of returned results in their
searches?
A.10
B.25
C.50
D.100
Answer: B

certification IBM   LOT-981 examen   LOT-981

NO.23 When calculating the size of a mail file to determine whether it conforms to configured mail quota or
warning threshold limits, Domino treats attachments stored using the Domino Attachment and Object
Service as which of the following?
A.As though each user does not have a quota
B.As though each user owned the entirety of the attachment file
C.As though each user owns only the size of the message without the attachment
D.as though each user cannot exceed warning threshold limits for their mailfile
Answer: B

certification IBM   LOT-981   LOT-981

NO.24 Marcus, the Domino administrator, wishes to modify the reverse path setting on forwarded messages
sent by user mail rules. Which of the following settings would allow the message to possibly bypass spam
filters while not providing a valid email address?
A.Set reverse-path to null
B.Preserve existing value
C.Use recipient Internet address
D.Construct nondeliverable return address
Answer: D

IBM   LOT-981   LOT-981   LOT-981 examen

NO.25 A server was given Editor access to an application. Which one of the following describes how this
server fits into the design distribution process for this application?
A.It can send design changes only.
B.It can receive design changes only.
C.It can both send and receive design changes.
D.It can neither send nor receive design changes.
Answer: B

certification IBM   LOT-981   LOT-981   certification LOT-981   LOT-981

NO.26 ServerA/Singapore/Acme is being accessed by both Web and Notes clients:
1. Web clients are in the Web Users group.
2. Notes clients are in the Corporate Users group.
Which one of the following should Hans, a Domino administrator, do to ensure that only Web users
access ServerA/Singapore/Acme?
A.Recertify ServerA/Singapore/Acme using a different OU certifier.
B.Change the Access server field in the Server document to remove Corporate Users.
C.Remove all Person documents from the Domino Directory on ServerA/Singapore/Acme.
D.Change the Not access server field in the Server document to remove Corporate Users.
Answer: B

certification IBM   certification LOT-981   LOT-981 examen   LOT-981

NO.27 Domino Domain Monitoring (DDM) contains how many classes of event information?
A.One
B.Two
C.Three
D.Four
Answer: B

IBM   certification LOT-981   LOT-981   LOT-981

NO.28 Marilyn wants to view the expired certificates in the Certification Revocation List (CRL). In which one
of the following would Marilyn find this information?
A.This information cannot be viewed.
B.In the CRL document in the Domino Directory.
C.In the Certifier document in the Domino Directory.
D.In the Server document in the Domino Directory.
Answer: C

certification IBM   LOT-981   certification LOT-981

NO.29 Your company has been utilizing the ID vault and regularly marking IDs as inactive when a user
leaves the company. In this instance, a user has returned to the company. Which of the following steps
represent the best option for this returning user?
A.Choose to restore the id in the vault as active again
B.When registering the user, add the new id to the vault
C.Have the user email their id file back to the vault to reactivate
D.Have the user authenticate via the web interface to activate their old id file
Answer: A

IBM   LOT-981   LOT-981   LOT-981   certification LOT-981

NO.30 Roxana issued the command SET SECURE NOONE at the server console. What did this
accomplish?
A.Locked the web console to browser users
B.Prevented anyone from accessing the server console
C.Prevented anyone other than himself from using the console
D.Forced anyone using the console to type in the password NOONE to have access to the console
Answer: D

IBM   LOT-981 examen   LOT-981 examen   LOT-981   certification LOT-981

Si vous vous inscriez le test IBM LOT-981, vous devez choisir une bonne Q&A. Le test IBM LOT-981 est un test Certification très important dans l'Industrie IT. C'est essentielle d'une bonne préparation avant le test.

Microsoft 070-511, de formation et d'essai

Pass4Test est un seul site web qui peut offrir toutes les documentations de test Microsoft 070-511. Ce ne sera pas un problème à réussir le test Microsoft 070-511 si vous préparez le test avec notre guide d'étude.

Bien qu'Il y ait plein de talentueux dans cette société, il manque beaucoup de professionnels dans les domaine en cours de développement, l'Industrie IT est l'un de ces domaines. Donc le test Microsoft 070-511 est un bon l'examination de technique informatique. Pass4Test est un site d'offrir la formation particulière au test Microsoft 070-511.

Le test Certificat Microsoft 070-511 est bien populaire pendant les professionnels IT. Ce Certificat est une bonne preuve de connaissances et techniques professionnelles. C'est une bonne affaire d'acheter une Q&A de qualité coûtant un peu d'argent. Le produit de Pass4Test vise au test Certification Microsoft 070-511. Vous allez prendre toutes essences du test Microsoft 070-511 dans une courte terme.

Code d'Examen: 070-511
Nom d'Examen: Microsoft (TS: Windows Applications Development with Microsoft .NET Framework 4)
Questions et réponses: 156 Q&As

Pass4Test est un site qui peut réalise le rêve de beaucoup de professionnels. Pass4Test peut vous donner un coup de main pour réussir le test Certification Microsoft 070-511 via son guide d'étude. Est-ce que vous vous souciez de test Certification Microsoft 070-511? Est-ce que vous êtes en cours de penser à chercher quelques Q&As à vous aider? Pass4Test peut résoudre ces problèmes. Les documentations offertes par Pass4Test peuvent vous provider une préparation avant le test plus efficace. Le test de simulation de Pass4Test est presque le même que le test réel. Étudier avec le guide d'étude de Pass4Test, vous pouvez passer le test avec une haute note.

On doit faire un bon choix pour passer le test Microsoft 070-511. C'est une bonne affaire à choisir la Q&A de Pass4Test comme le guide d'étude, parce que vous allez obtenir la Certification Microsoft 070-511 en dépensant d'un petit invertissement. D'ailleur, la mise à jour gratuite pendant un an est aussi gratuite pour vous. C'est vraiment un bon choix.

Vous pouvez télécharger tout d'abord le démo gratuit pour prendre un essai. Vous serez confiant davantage sur Pass4Test après l'essai de démo. Vous allez réussir le test Microsoft 070-511 sans aucune doute si vous choisissez le Pass4Test.

070-511 Démo gratuit à télécharger: http://www.pass4test.fr/070-511.html

NO.1 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You write the following code segment.
public class Contact { private string _contactName;
public string ContactName {
get { return _contactName; }
set {
if (string.IsNullOrEmpty(value))
throw new ApplicationException("Contact name is required");
_contactName = value;
}
}
}
You add the following code fragment in a WPF window control.
<TextBox Text="{Binding Path=ContactName, ValidatesOnExceptions=True,
UpdateSourceTrigger=PropertyChanged}" />
The TextBox control is data-bound to an instance of the Contact class. You plan to implement an
ErrorTemplate in the TextBox control.
You need to ensure that the validation error message is displayed next to the TextBox control. Which code
fragment should you use?
A. <ControlTemplate>
<DockPanel>
<AdornedElementPlaceholder Name="box" />
<TextBlock Text="{Binding ElementName=box,
Path=AdornedElement.(Validation.Errors)[0].ErrorContent}" Foreground="Red" />
</DockPanel>
</ControlTemplate>
B. <ControlTemplate>
<DockPanel>
<AdornedElementPlaceholder Name="box" />
<TextBlock Text="{Binding ElementName=box, Path=(Validation.Errors)[0].Exception.Message}"
Foreground="Red" />
</DockPanel>
</ControlTemplate>
C. <ControlTemplate>
<DockPanel>
<ContentControl Name="box" />
<TextBlock Text="{Binding ElementName=box,
Path=ContentControl.(Validation.Errors)[0].ErrorContent}" Foreground="Red" />
</DockPanel>
</ControlTemplate>
D. <ControlTemplate>
<DockPanel> <ContentControl Name="box" />
<TextBlock Text="{Binding ElementName=box, Path=(Validation.Errors)[0].Exception.Message}"
Foreground="Red" />
</DockPanel>
</ControlTemplate>
Answer: A

certification Microsoft   070-511   070-511 examen

NO.2 You create a Windows client application by using Windows Presentation Foundation (WPF).
The application contains the following code fragment.
<Window.Resources>
<DataTemplate x:Key="detail">
<!--...-->
</DataTemplate>
</Window.Resources>
<StackPanel>
<ListBox Name="lbDetails">
</ListBox>
<Button Name="btnDetails">Details</Button>
</StackPanel>
You need to assign lbDetails to use the detail data template when btnDetails is clicked.
Which code segment should you write for the click event handler for btnDetails?
A. lbDetails.ItemsPanel.FindName("detail",lbDetails);
B. var tmpl = (ControlTemplate)FindResource("detail"); lbDetails.Template = tmpl;
C. var tmpl = (DataTemplate)FindName("detail"); lbDetails.ItemTemplate = tmpl;
D. var tmpl = (DataTemplate)FindResource("detail"); lbDetails.ItemTemplate=tmpl;
Answer: D

certification Microsoft   070-511   070-511   070-511 examen   070-511

NO.3 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You plan to use a Windows Presentation Foundation (WPF) control of the UserControl1 type hosted in an
ElementHost control named elementHost1.
You write the following code segment. (Line numbers are included for reference only.)
01public class WPFInWinForms {
02public WPFInWinForms
03{
04InitializeComponent();
05
06}
07private void OnBackColorChange(object sender, String propertyName, object value)
08{
09ElementHost host = sender as ElementHost;
10System.Drawing.Color col = (System.Drawing.Color)value;
11SolidColorBrush brush =
new SolidColorBrush(System.Windows.Medi
a.Color.FromRgb(col.R, col.G, col.B));
12UserControl1 uc1 = host.Child as UserControl1;
13uc1.Background = brush;
14}
15}
You need to ensure that the application changes the background color of the hosted control when the
background color of the form changes.
Which code segment should you insert at line 05?
A. elementHost1.PropertyMap.Remove("BackColor");
elementHost1.PropertyMap.Add("BackColor", new PropertyTranslator(OnBackColorChange));
B. elementHost1.PropertyMap.Remove("Background");
elementHost1.PropertyMap.Add("Background", new PropertyTranslator(OnBackColorChange));
C. elementHost1.PropertyMap.Add("BackColor", new PropertyTranslator(OnBackColorChange));
elementHost1.PropertyMap.Apply("BackColor");
D. elementHost1.PropertyMap.Add("Background", new PropertyTranslator(OnBackColorChange));
elementHost1.PropertyMap.Apply("Background");
Answer: A

certification Microsoft   070-511 examen   certification 070-511

NO.4 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You write the following code segment. (Line numbers are included for reference only.)
01public class Contact
02{
03private string _contactName;
04
05public string ContactName {
06get { return _contactName; }
07set { _contactName = value; }
08}
09
10}
You add the following code fragment within a WPF window control.
<TextBox>
<TextBox.Text>
<Binding Path="ContactName" UpdateSourceTrigger="PropertyChanged">
<Binding.ValidationRules>
<DataErrorValidationRule />
</Binding.ValidationRules>
</Binding>
</TextBox.Text>
</TextBox>
The TextBox control is data-bound to an instance of the Contact class.
You need to ensure that the Contact class contains a business rule to ensure that the ContactName
property is not empty or NULL.
You also need to ensure that the TextBox control validates the input data.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two).
A. Replace line 01 with the following code segment. public class Contact : IDataErrorInfo
B. Replace line 01 with the following code segment. public class Contact : ValidationRule
C. Replace line 01 with the following code segment. public class Contact : INotifyPropertyChanging
D. Add the following code segment at line 04. public event PropertyChangingEventHandler
PropertyChanging;
E. Modify line 07 with the following code segment:
set {
if (this.PropertyChanging != null)
PropertyChanging(this, new
PropertyChangingEventArgs("ContactName"));
if (string.IsNullOrEmpty(value))
throw new ApplicationException("Contact name is required");
_contactName = value;
}
F. Add the following code segment at line 09.
public string Error {
public string this[string columnName] {
get {
if (columnName == "ContactName" &&
string.IsNullOrEmpty(this.ContactName))
return "Contact name is required";
return null;
}
}
Answer: AF

Microsoft   070-511   070-511

NO.5 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You create a window that contains a Button control and a MenuItem control. Both controls are labeled
"Add sugar."
The Command properties of the Button and MenuItem controls are set to the same RoutedCommand
named AddSugarCommand.
You write the following code segment.
private void CanAddSugar (object sender, CanExecuteRoutedEventArgs e) { ... }
You need to ensure that when the CanAddSugar method sets e.CanExecute to false, the MenuItem and
Button controls are disabled.
What should you do?
A. Create an event handler for the CanExecuteChanged event of the AddSugarCommand command.
Call the CanAddSugar method from within the event handler.
B. Inherit the AddSugarCommand from the RoutedUICommand class instead of the RoutedCommand
class.
Call the CanAddSugar method from within the constructor of the AddSugarCommand command.
C. Add a CommandBinding object to the CommandBinding property of the MenuItem control.
Set the CanExecute property of the CommandBinding object to the CanAddSugar method.
D. Add a CommandBinding object to the CommandBindings property of the window.
Set the Command property of CommandBinding to the AddSugarCommand command.
Set the CanExecute property of the CommandBinding object to the CanAddSugar method.
Answer: D

Microsoft   070-511 examen   certification 070-511

NO.6 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You have a dataset as shown in the following exhibit.
You plan to add a DataGridView to display the dataset.
You need to ensure that the DataGridView meets the following requirements:
- Shows Order Details for the selected order.
- Shows only Order Details for items that have UnitPrice greater than 20.
- Sorts Products by ProductName
Which code segment should you use?
A. ordersBindingSource.DataSource = productsBindingSource;
ordersBindingSource.DataMember = "FK_Order_Details_Products";
productsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
B. productsDataGridView.DataSource = ordersBindingSource;
productsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
C. order_DetailsBindingSource.DataSource = ordersBindingSource;
order_DetailsBindingSource.DataMember = "FK_Order_Details_Orders";
order_DetailsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
D. order_DetailsDataGridView.DataSource = ordersBindingSource;
order_DetailsBindingSource.Filter = "UnitPrice > 20";
productsBindingSource.Sort = "ProductName";
Answer: C

Microsoft   070-511   070-511   certification 070-511

NO.7 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application contains a composite user control that includes a TextBox control named txtInput.
The user control will be hosted in a window and will have handlers for the text-changed event of txtInput.
You need to ensure that the application meets the following requirements:
AddHandler (TextBox.TextChangedEvent, new RoutedEventHandler (Audit_TextChanged), true);
Which of the following statments are TRUE? (choose all that apply)
A. A text-changed event handler, named Audit_TextChanged, was Created for the txtInput control.
B. Audit_TextChanged will stop running because the event is marked as handled by certain event
handlers.
C. Even through the event is marked handled by certain event handlers, Audit_TextChanged will still run.
D. Audit_TextChanged will continue to run until the event is marked as handled.
Answer: AC

Microsoft   070-511 examen   070-511 examen

NO.8 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You want to add an audio player that plays .wav or .mp3 files when the user clicks a button.
You plan to store the name of the file to a variable named SoundFilePath.
You need to ensure that when a user clicks the button, the file provided by SoundFilePath plays.
What should you do?
A. Write the following code segment in the button onclick event.
System.Media.SoundPlayer player = new System.Media.
SoundPlayer(SoundFilePath); player.play();
B. Write the following code segment in the button onclick event.
MediaPlayer player = new MediaPlayer();
player.Open(new URI(SoundFilePath), UriKind.Relative)); player.play();
C. Use the following code segment from the PlaySound() Win32 API function and call the PlaySound
function in the button onclick event.
[sysimport(dll="winmm.dll")]
public static extern long PlaySound(String SoundFilePath, long hModule, long dwFlags);
D. Reference the Microsoft.DirectX Dynamic Link Libraries. Use the following code segment in the button
onclick event.
Audio song = new Song(SoundFilePath);
song.CurrentPosition = song.Duration; song.Play();
Answer: B

Microsoft examen   070-511 examen   070-511   certification 070-511

NO.9 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application contains a composite user control that includes a TextBox control named txtInput.
The user control will be hosted in a window and will have handlers for the text-changed event of txtInput.
You need to ensure that the application meets the following requirements:
- Creates a text-changed event handler named Audit_TextChanged for the txtInput control.
- Executes Audit_TextChanged even when specific handlers mark the event as handled.
Which code segment should you add to the constructor of the user control.?
A. txtInput.TextChanged+=Audit_TextChanged;
B. AddHandler (TextBox.TextChangedEvent, new RoutedEventHandler (Audit_TextChanged), true);
C. EventManager.RegisterClassHandler (typeof (TextBox),TextBox.TextChangedEvent, new
RoutedEventHandler (Audit_TextChanged), true);
D. EventManager.RegisterClassHandler (typeof (TextBox), TextBox.TextChangedEvent, new
RoutedEventHandler (Audit_TextChanged), false);
Answer: B

certification Microsoft   certification 070-511   070-511   certification 070-511

NO.10 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
The application has a window named MainWindow that has a StackPanel control named sp as the root
element.
You want to create a Button control that contains a TextBlock control with the "Save" Text property.
You need to create the control dynamically and add the control to sp.
Which code segment should you write in the constructor of the MainWindow class?
A. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.Content = text;
sp.DataContext = btn;
B. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.Content = text;
sp.Children.Add(btn);
C. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
sp.Children.Add(btn);
sp.Children.Add(text);
D. Button btn = new Button();
TextBlock text = new TextBlock();
text.Text = "Save";
btn.ContentTemplateSelector.SelectTemplate(text, null);
sp.Children.Add(btn);
Answer: B

Microsoft   070-511   certification 070-511   070-511   070-511 examen

NO.11 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You write the following code fragment.
<StackPanel TextBox.PreviewTextInput="StackPanel_PreviewTextInput">
<TextBox Name="TxtBoxA"/>
<TextBox Name="TxtBoxB"/>
<TextBox Name="TxtBoxC"/>
</StackPanel>
You create an event handler named StackPanel_PreviewTextInput. You also have a collection of strings
named Keywords.
You need to ensure that TxtBoxA and TxtBoxB do not contain any of the strings in the Keywords
collections.
Which code segment should you use?
A. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{ FrameworkElement feSource = sender as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{ foreach(string keyword in Keywords)
{
if(e.Text.Contains(keyword)) {
e.Handled = false;
return;
}
}} e.Handled = true;
} }
B. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e) {
FrameworkElement feSource = e.Source as FrameworkElement;
f (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
f (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB") {
foreach(string keyword in Keywords)
{
if(e.Text.Contains(keyword)) {
e.Handled = false;
return;
}
} e.Handled = true;
C. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{
FrameworkElement feSource = sender as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{ foreach(string keyword in Keywords)
{ if(e.Text.Contains(keyword)) {
e.Handled = true;
return; }
} e.Handled = false;
} }
D. private void StackPanel_PreviewTextInput( object sender, TextCompositionEventArgs e)
{ FrameworkElement feSource = e.Source as FrameworkElement;
if (feSource.Name == "TxtBoxA" || feSource.Name == "TxtBoxB")
{
foreach(string keyword in Keywords)
{ if(e.Text.Contains(keyword)) {
e.Handled = true;
return;
} } e.Handled = false;
}
}
Answer: D

certification Microsoft   certification 070-511   070-511

NO.12 You use Microsoft Visual Studio 2010 and Microsoft .
NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You create a WPF window in the application.
You add the following code segment to the application.
public class ViewModel
{
public CollectionView Data { get; set; }
}
public class BusinessObject
{
public string Name { get; set; }
}
The DataContext property of the window is set to an instance of the ViewModel class.
The Data property of the ViewModel instance is initialized with a collection of BusinessObject objects.
You add a TextBox control to the Window.
You need to bind the Text property of the TextBox control to the Name property of the current item of the
CollectionView of the DataContext object.
You also need to ensure that when a binding error occurs, the Text property of the TextBox control is set to
N/A .
Which binding expression should you use?
A. { Binding Path=Data/Name, FallbackValue='N/A' }
B. { Binding Path=Data.Name, FallbackValue='N/A' }
C. { Binding Path=Data/Name, TargetNullValue='N/A' }
D. { Binding Path=Data.Name, TargetNullValue='N/A' }
Answer: A

Microsoft examen   certification 070-511   070-511   certification 070-511   certification 070-511

NO.13 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF)
application.
You plan to use an existing Windows Forms control named MyWinFormControl in the MyControls
assembly.
You need to ensure that the control can be used in your application.
What should you do?
A. Add the following code fragment to the application.
<Window x:Class="HostingWfInWpf.Window1"
xmlns="http: //schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http: //schemas.microsoft.com/winfx/2006/xaml"
xmlns:wf="clr-namespace:MyCompany.Controls;assembly=MyControls;" Title="HostingWfInWpf" >
<Grid>
<ElementHost>
<wf:MyWinFormControl x:Name="control" />
</ElementHost>
</Grid> </Window>
B. Add the following code fragment to the application.
<Window x:Class="HostingWfInWpf.Window1"
xmlns="http: //schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http: //schemas.microsoft.com/winfx/2006/xaml"
xmlns:wf="clr-namespace:MyCompany.Controls;assembly=MyControls;" Title="HostingWfInWpf" >
<Grid>
<WindowsFormsHost>
<wf:MyWinFormControl x:Name="control" />
</WindowsFormsHost>
</Grid> </Window>
C. Add the following code segment to the WindowsLoaded function.
ElementHost host = new ElementHost();
host.Dock = DockStyle.Fill;
MyWinFormControl control = new MyWinFormControl();
host.Child = control;
this.Controls.Add(host);
D. Add the following code segment to the WindowsLoaded function.
Grid grid = new Grid();
System.Windows.Forms.Integration.WindowsFormsHost host = new
System.Windows.Forms.Integration.WindowsFormsHost();
MyWinFormControl control = new MyWinFormControl();
grid.Children.Add(host);
Answer: B

Microsoft   070-511   070-511 examen   070-511 examen   070-511 examen   certification 070-511

NO.14 You use Microsoft .NET Framework 4 to create a Windows Forms application.
You add a new class named Customer to the application.
You select the Customer class to create a new object data source.
You add the following components to a Windows Form:
- A BindingSource component named customerBindingSource that is data-bound to the Customer object
data source.
- A set of TextBox controls to display and edit the Customer object properties.
- Each TextBox control is data-bound to a property of the customerBindingSource component.
- An ErrorProvider component named errorProvider that validates the input values for each TextBox
control.
You need to ensure that the input data for each TextBox control is automatically validated by using the
ErrorProvider component.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Implement the validation rules inside the Validating event handler of each TextBox control by throwing
an exception when the value is invalid.
B. Implement the validation rules inside the TextChanged event handler of each TextBox control by
throwing an exception when the value is invalid.
C. Implement the validation rules inside the setter of each property of the Customer class by throwing an
exception when the value is invalid.
D. Add the following code segment to the InitializeComponent method of the Windows Form.
this.errorProvider.DataSource = this.customerBindingSource;
E. Add the following code segment to the InitializeComponent method of the Windows Form.
this.errorProvider.DataSource = this.customerBindingSource.DataSource;
this.errorProvider.DataMember = this.customerBindingSource.DataMember;
Answer: CD

certification Microsoft   070-511   070-511   certification 070-511

NO.15 You use Microsoft .NET Framework 4 to create a Windows Presentation Foundation (WPF) application.
You write the following code fragment.
<StackPanel>
<StackPanel.Resources>
<Style TargetType="{x:Type Button}">
<EventSetter Event="Click" Handler="ButtonHandler"/>
</Style>
</StackPanel.Resources>
<Button Name="OkButton">Ok</Button>
<Button Name="CancelButton" Click="CancelClicked">Cancel</Button>
</StackPanel>
You need to ensure that the ButtonHandler method is not executed when the user clicks the CancelButton
button.
Which code segment should you add to the code-behind file?
A. private void CancelClicked(object sender, RoutedEventArgs e)
{
Button btn = (Button)sender;
btn.Command = null;
}
B. private void CancelClicked(object sender, RoutedEventArgs e) {
Button btn = (Button)sender;
btn.IsCancel = true;
}
C. private void CancelClicked(object sender, RoutedEventArgs e) {
e.Handled = true;
}
D. private void CancelClicked(object sender, RoutedEventArgs e) {
e.Handled = false;
}
Answer: C

Microsoft examen   070-511 examen   certification 070-511   070-511

Dans l'Industrie IT, le certificat IT peut vous permet d'une space plus grande de se promouvoir. Généralement, la promotion de l'entreprise repose sur ce que vous avec la certification. Le Certificat Microsoft 070-511 est bien autorisé. Avec le certificat Microsoft 070-511, vous aurez une meilleure carrière dans le future. Vous pouvez télécharger tout d'abord la partie gratuite de Q&A Microsoft 070-511.